What a New Roof Costs in Burbank This Year — Inspection Notes
What moves the number on a roof replacement in the Valley, and where the cheap bid gets cheap.
Nobody enjoys asking what a roof costs, and very few answers are useful without context. For a roof replacement in the San Fernando Valley the honest working range is $5.50 a square foot at the simple end to well past $19.00 for tile and metal work. What follows is what sits behind that number and why two quotes on the same property can be thousands apart.
What you are actually paying for
Layer count, deck condition, roof complexity, access and disposal. Between them these decide most of the spread between two quotes on the same house.
Where quotes diverge
Deck repair should be priced per sheet in writing before work starts, because it is the one item nobody can size until the covering comes off. Deck repair should be priced per sheet in writing before work starts. It is the one item nobody can size accurately until the covering comes off, and it is the most common source of mid-job disputes. It is also the line that most often separates two quotes that looked identical on page one.
How the San Fernando Valley changes the figure
Summer is the problem here. The Valley runs ten to fifteen degrees hotter than the coast and holds it for weeks, so a roof surface that reads 90 degrees in Santa Monica is well past 160 in Van Nuys by mid-afternoon. Everything on the roof expands into that heat and contracts again overnight, and it is that daily movement, not the peak temperature, that opens laps and backs fasteners out. Most of the housing went up between 1950 and 1975, which means original decking, undersized ventilation and at least one previous layer that somebody roofed straight over rather than tearing off.
What we look at before quoting
- Number of existing layers to be removed and disposed of
- Deck repair rate, stated per sheet in the written estimate
- Underlayment specification, by name rather than by description
- Flashing: replaced or reused, item by item
- Ventilation work included in the scope
- Permit and inspection responsibility
- Payment schedule, and what triggers each stage
Common questions
Can I get an accurate price without an inspection?
You can get a range. You cannot get a price, because nobody knows the deck condition until the covering comes off, which is why the per-sheet repair rate belongs in the estimate.
Is financing worth it on a roof?
It depends on the alternative. Deferring a failing roof through another wet season usually costs more in interior repairs than the finance charge would have.
The honest summary
Compare scopes, not totals. Two quotes on the same roof that differ by thousands are usually pricing two different pieces of work, and the difference is almost always written in the exclusions. In the San Fernando Valley the thing to watch is attic temperature and intake ventilation, because a Valley attic that cannot breathe cooks the underside of the roof as hard as the sun cooks the top.
Free inspection, drone photography where access is difficult, and a written estimate with deck repair priced per sheet. No obligation.
More on Costs & Financing
- What a New Roof Costs in the Westside This Year — What to ExpectCosts & Financing
- Budgeting for a Roof Five Years Out — Homeowner ChecklistCosts & Financing
- Budgeting for a Roof Five Years Out — Budget PlanningCosts & Financing
- Warranty Types and What They Cover — Long-Term ViewCosts & Financing